California Painting and Decorating Contractor (C-33) License Practice Exam

These questions are part of the practice quiz. Start practicing

• Which instrument is used to determine the proper thickness of paint for spraying?
• Which of the following steps is part of exterior wood surface preparation before painting?
• What is the maximum height of a tiered horse scaffold?
• What is used on varnished wood?
• Which adhesive is recommended for vinyl wallpaper installation?
• What is the primary purpose of shop drawings in a painting project?
• Which tape is used in hot sun?
• Which statement correctly contrasts lump-sum bids and unit-price bids?
• Which material is heated to produce red lead?
• Which thinner is used for chlorinated rubber paint?
• Which product would you apply to wood crack repairs prior to finishing?
• Which materials are considered VOCs?
• Which materials are considered VOCs in painting products?
• What is the minimum length of ladder rungs?
• Which brush is known for the highest paint-holding capacity?
• How should you handle compressed air or solvent cleanup safely?
• How do you calculate finish coat coverage for a project?
• Action level for lead is how many micrograms per cubic meter?
• Who benefits from a documented final inspection and sign-off?
• Which masking tape is listed for laminated windows?
• When should you prime a spot rather than the entire surface?
• Paint has a harder time adhering to which type of wood?
• What nap size is considered long nap for rollers?
• Worker allowed on window jack scaffold?
• What is the purpose of a final inspection and owner sign-off?
• What PPE is essential when sanding painted surfaces?
• When disposing of solvents used in cleanup, what must you do?
• What is the stored ladder position?
• What is the standard spacing between ladder rungs?
• Used right before paint on drywall?
• What is the recommended method to prepare wood that has weep and pitch?
• In masking tasks, which tape is noted for use in hot sun?
• What is used to apply epoxy to a door?
• Which statement correctly differentiates submittals from shop drawings?
• Which statement reflects the minimum rung length requirement?
• What is the tallest extension ladder allowed on a job site?
• What are common causes of roller laps or brush marks?
• A claim arising after project completion would typically be covered by which insurance?
• To make red lead, which compound is used?
• In practice, what is the difference between a submittal and a shop drawing?
• What is a typical contingency or waste allowance in estimates?
• Why is surface moisture assessment critical before painting?
• What should a well-drafted change order include?
• What is the maximum height for a stepladder on a job site?
• Flammable gas or vapor creates dangerous air contamination if greater than what percent?
• To activate adhesive for wallpaper, which action is used?
• What is a typical difference between interior latex and alkyd enamels?
• Which component should be popped weekly to ensure proper operation?
• What is the maximum height on a ladder jack scaffold?
• When using an airless spray gun, you should work in what type of area?
• On a suspension scaffold, the recommended number of workers?
• What is a primary reason for documenting warranty duration and procedures?
• Wash skin this much of solvent spills on skin?
• What is the most economical way to sand flat walls?
• What is a stop notice and how does it help on public projects?
• If the second coat is applied before the first coat dries, what defect occurs?
• Which topics are typically covered by an MSDS/SDS?
• What is the primary purpose of a change order before performing work?
• Before wallpapering a new plaster wall, what should be applied?
• Which tool is used to texture paint?
• A problem you would encounter if you spray lacquer on a polished silicone surface?
• What is the role of caulking in a painting project?
• Paint samples shown under artificial light may appear what color?
• What instrument measures viscosity for spray painting?
• What is the purpose of sanding sealer or pore-filling primers on wood?
• Preparing wood deck before sealing involves washing with what?
• If sprinklers have been installed, what effect does it have on flame spread rating?
• The type of thinner used on chlorinated rubber paint?
• What covers and hides surface cracks?
• Which of the following is not typically a factor in exterior coating durability?
• Which item is commonly used to remove grass cloth?
• To clean shellac from brushes, which solvent is most effective?
• Which option correctly states the standard ladder rung spacing?
• Oxygen level threshold below which respirators must be worn?
• Safety belt must be provided if worker is this high?
• How many people can the ladder jack scaffold accommodate according to the data?
• What is the purpose of a change order in a painting project?
• Which finish is commonly used to seal pitch on wood?
• What is dry film thickness and why is it important?
• What binds pigment in paint?
• To activate adhesive for wallpaper, which action is used?
• What is a primary purpose of a project schedule in coordinating with trades?
• What coverages are commonly required for C-33 painters?
• Which surfaces require primer and why?
• How should you manage waste and spill control on a project site?
• How do solvent-based and water-based coatings differ in cleanup?
• Which is the primary safety purpose of guardrails and toeboards on scaffolds?
• What is the minimum recommended outdoor painting temperature?
• What is a best practice for quality control during painting?
• What factors influence primer selection for a project?
• Which statement best describes stop notices on public projects?
• When using a straight ladder, how many ladder rungs may be used without a safety belt?
• What is the minimum safe clearance distance between a metal ladder and nearby electrical equipment?
• How should exterior wood surfaces be prepared before painting?
• What action should be taken when the surface is tacky after staining cabinets?
• Surface coatings must resist room temperatures of this amount for 25 minutes without detachment from the surface?
• When using a plank with a sawhorse and a ladder as a scaffold, what extension length is used?
• What is considered a low pressure wash?
• Etching new concrete is done to prevent exposure to which substance?
• What insurance certificates should you maintain for subcontractors?
• What are common scaffold safety requirements?
• Which action best supports preventing adhesion problems on porous or stained areas?
• Which coating is allowed on a wooden ladder for finish?
• If you paint on a damp day, what happens to the paint's curing time?
• Safe distance requirement from overhead electrical lines between 600-50,000 V?
• What is used on laminated windows?
• Etching new concrete is primarily done to prevent alkali from interfering with coatings. What is the substance?
• Why is rot treatment included in exterior wood preparation before painting?
• Which brush type is traditionally associated with high paint retention?
• If sprinklers have been installed, flame spread rating is reduced by how many classifications?
• Which tape is commonly used for masking that performs well in sunlight?
• Which safety rule applies when using a straight ladder?
• Threshold for dangerous air contamination due to flammable gas or vapor?
• Which product is used to repair cracks and holes in wood before finishing?
• Open-ended wood cells not sealed may cause what condition in stained wood?
• Max height of ladder jack scaffold?
• When using an airless spray gun, what percentage overlap is common?
• Which type of roller cover is suitable for latex paint?
• What is used to prevent discoloring of the finish?
• Flame spread class 1, 2, 3 materials are described as what?
• Max height of ladder jack scaffold?
• What is the difference between general liability and completed operations insurance?
• Which document tends to be project-specific and shows fabrication details used by the fabricator?
• What is the distance from the wall to the foot of a ladder, expressed as a fraction of the ladder's length?
• How should lead-containing debris be disposed of?
• What component should be popped weekly?
• What topics should you study to prepare for the CSLB C-33 exam?
• How should warranties be documented on painting projects?
• Which coating is most scratch resistant?
• Materials with which flame spread classification are considered easily combustible?
• What issue occurs when painting wet masonry?
• Before wallpapering, which material is commonly applied to seal gaps?
• What range of psi corresponds to a low pressure wash in the material?
• What causes paint to crack?
• How do VOC regulations affect coating choices?
• According to ladder placement guidelines, how far should the base be from the wall for every four rungs?
• Minimum recommended outdoor painting temperature?
• PEL for lead exposure is how many micrograms per cubic meter over 8 hours?
• What is used to seal wood that has weep and pitch?
• To obtain a smooth wood surface before painting, which filler is commonly used?
• For applying thick finishes, which brush is preferred?
• Which surface typically requires curing for at least one month at 60°F or more before painting?
• What is used to remove grass cloth?
• What type of paint or coating is allowed on a wooden ladder?
• What preparation is recommended before wallpapering a new plaster wall?
• Why is adherence to weather and temperature guidelines important?
• What is a mechanics lien and when is it used?
• How is material takeoff used in estimating?
• Which ladder safety practices reduce fall risk?
• Which statement about ladder safety near electrical equipment is correct?
• Which steps are included in preparing concrete, masonry, or stucco surfaces before coating?
• Which coating provides the highest scratch resistance?
• Which tool holds the most paint?
• Which adhesive suits vinyl wallpaper installation best?
• What is used to prime ferrous metal?
• What is a basic job safety plan (JSP/JSA) for painting?
• Reverse every other strip is used to prevent what issue in wallpaper installation?
• On a suspension scaffold, how many workers are typically present?
• Which topic is commonly included in CSLB C-33 exam preparation?
• Minimum safe clearance from overhead lines for 600-50,000 V?
• Which of the following correctly describes a valid change order authorization?
• Why is sample color approval important?
• What is used when painting baseboards around carpet?
• Electrical wires are commonly made of which materials?
• What is used to clean shellac off brushes?
• What is the primary purpose of an MSDS/SDS in coatings work?
• Which set of factors influence exterior coating durability?
• What condition causes paint to wrinkle?
• How should concrete, masonry, or stucco surfaces be prepared before coating?
• Why is lead safety training essential for painters?
• What are key lead-safety requirements for renovation/painting?
• Most likely to bleed resin into paint?
• In painting projects, a punch list is used to record items that are not in compliance or outstanding at project closeout.
• Which option would you choose for vinyl wallpaper installation?
• What is the highest rung you should stand on when using a step ladder?
• Which coating is described as covering and hiding surface cracks?
• What should a bid proposal letter typically include?
• Which of the following is NOT a criterion for prequalifying subcontractors?
• Which tool is the most economical method to sand flat walls?
• Open-ended wood cells not sealed are likely to cause which issue in stained wood?
• Which roller cover material is appropriate for latex paints?
• Which coat is applied after joint taping to create a smooth surface before finish coats?
• Respirator must be worn if oxygen is below what percentage?
• Guardrails must withstand how many pounds?
• What defect occurs when lacquer is sprayed on polished silicone surfaces?
• How should you classify workers to avoid misclassification risk?
• Which adhesive is best for vinyl wallpaper?
• What is the first step to take before wallpapering a room?
• What method determines finish coat coverage when planning a project?
• Which step is used immediately before painting drywall according to the material?
• What is the recommended angle between the ladder and the floor?
• What is the recommended overlap percentage when using an airless spray gun?
• How should you handle weather-related delays?
• Which statement about extension ladder height limits on job sites is correct?
• Extension length of plank between sawhorse and step ladder for use as scaffold?
• What is the recommended action regarding masking tape when staining cabinets if the surface is tacky?
• What criteria are used to prequalify subcontractors?
• What is the role of primers in improving adhesion on porous surfaces?
• In a painting contract package, which element outlines the technical requirements for coatings, finishes, and application methods?
• What is the purpose of a job safety analysis (JSA) for painting?
• What is the purpose of a change order in a painting project?
• After sheetrock joints are taped, what coat is typically applied?
• What documents typically comprise a painting contract package?
• Which item would you expect to see describing how the work is to be performed in a painting contract package?
• Minimum size of scaffold plank?
• On private projects, a mechanics lien is used to secure payment against which entity?
• What thickness should elastomeric coating be applied?
• What is used to clean polyurethane off a brush?
• Which respirator is suitable when removing wallboard?